Fujitsu PSWITCH 2048T User Manual page 168

FUJITSU PSWITCH
 Check the status of power units with the show environment command.
Command Execution Example
(ET-7648BRA-FOS) #show environment
Temperature Sensors:
Unit Sensor Description
---- ------ ---------------- ---------- -------------- --------------
1 1 MAC
1 2 10GE
1 3 System CPLD
1 4 CPU
Fans:
Unit Fan Description
---- --- -------------- --------- ------------- ------------- --------------
1 1 Fan-1
1 2 Fan-2
1 3 Fan-3
1 4 Fan-4
1 5 Fan-5
1 6 Fan-6
Power Modules:
Unit Power supply
---- ------------
1 1
1 2
Power Consumption:
Unit Power supply
---- ------------
1 1
1 2
Battery Status: GOOD
Please confirm the State of Power Modules are "Operational".
【Cold Swap】: The case in which replaced with power-off of the switch
1. Plug out the power cable from the failed power unit connector.
2. Plug out the power cable from another power unit connector to power off the
switch.
3. Hold the handle of the power unit with lock released, and pull out the failed
power unit.
 Before replacing the power unit, please confirm that the switch is properly
fixed to the rack.
4. Replace the power unit with a spare parts. Insert
5. Connect the device to the terminal PC (FST-S) with a serial cable.
6. Plug in the power cable to the power connector.
168
Temp (C)
38
39
40
31
Type Speed
Removable 10031
Removable 9929
Removable 9929
Removable 9929
Removable 9929
Removable 10031
Description Type
----------------
PSU-1 Removable
PSU-2 Removable
Current (mA) Voltage (mV)
------------ ------------
8758 11869
0 0
State Max_Temp (C)
Level 1 41
Level 1 41
Level 1 44
Level 1 35
Duty level State
52% Operational
52% Operational
52% Operational
52% Operational
52% Operational
52% Operational
State
---------- --------------
Operational
Operational
Watt (mW)
------------
103948
0
User's Guide
December/2018