Connections: High Current - Curtis MultiMode 1207B Manual

M-
B-
Curtis 1207B Manual
Programmer Connector
A 4-pin Molex connector is provided for the 1311 handheld programmer or
the 1314 PC Programming Station. A mating cable is supplied with the 1311
handheld programmer.
Status LED
The Status LED, located on top of the controller, displays flashing codes to
indicate controller status; the codes are listed in Section 5.

CONNECTIONS: High Current

Four tin-plated copper bus bars are provided for the high current connections
to the battery and motor:
A2
B+
Cables are fastened to the bus bars by M8 (
When tightening the bolts, two opposing wrenches should
be used to prevent bending the bus bars and putting undue
strain on the internal connections.
output to motor armature
M-
negative connection to battery
B-
positive connection to battery/field
B+
plug diode to motor armature
A2
2 — INSTALLATION & WIRING
5
⁄ ") bolts.
1 6
5