Table of Contents
Advertisement
Adjusting the value
Notes:
•
The push buttons are preset with a delay called the debounce time.
•
Keeping one or both buttons pressed continuously will trigger an auto-repeat in
some menus.
1.
Select a menu item.
2.
Press the RED (+) or BLUE (–) push button to adjust the value up or down:
acceptance is indicated when the left-most colon on the LCD appears. (You have to
press longer than the debounce time to have the action accepted; the debounce
time varies according to the menu item selected.)
Transmitter Variables
•
Transmitter Variable 0 (TV0) is the capacitance as measured by the device.
•
Transmitter Variable 1 (TV1) is a computed variable: the dynamic value is a
computed derivative from the range settings for TV0.
Transmitter Variable User-defined Functions
TV0
TV1
7ML19985GG03
URV, LRV, Damping, USL and LSL
Pointek CLS500 – INSTRUCTION MANUAL
Units
Fixed to pF
Can be user-defined
Page 45
Advertisement
Table of Contents
