Location
Pointek CLS500 is normally mounted on the vessel top (high detection alarm) or through
the tank wall at the detection level (high or low detection alarm).
Angle
Mounting Instructions
Pointek CLS500 is easily installed: simply mount the instrument on the process
connection of the vessel.
Notes:
• The transmitter is specified for use at temperatures ranging from –40 C to
o
85 C (–40
standard option is available with a thermal isolator.
• Before mounting Pointek CLS500, check to ensure the threads are matching to
avoid damaging them.
7ML19985GG03
o
F to 185
F): if your process temperature is outside this range, a
Pointek CLS500 – INSTRUCTION MANUAL
Horizontal
Vertical
Page 25