Table of Contents
Advertisement
Menu Items
Notes:
•
Check that you are at the correct menu level before selecting a menu item.
•
Hold the RED or BLUE buttons for longer than the preset delay, or debounce time
to change a setting: this debounce time is generally around a second, but varies
from one menu item to another.
•
Protection is set at keylock level, menu 1F: make sure the setting is appropriate.
•
The transmitter variable, units as pF, units user-defined, or values as percent
set at menu 01; make sure the setting is appropriate.
•
Reset to factory settings at menu 12.
•
Factory settings are indicated with an asterisk (*) in the tables, unless explicitly
described.
a.
'Values as percent' is available as an option, but not useful for Pointek CLS 500.
Transmitter: Variable Settings: menu level 0
Notes:
•
You must select menu level 0 before you can access the items at that level.
•
The transmitter variable must be set for units in pF to enable settings to be changed
by push-button adjustment: (menu 01 must be set to PV = 0).
Stepsize Update Value
This menu selection controls the increment/decrement step-size for the menus 0B, 0C,
0D, 0E, 0F, and 03.
Menu
Affected
Item
by:
09
01
1. Set the rotary switch to 9.
2. Press the RED (+) or BLUE (–) button to increase or decrease this value in
decades: you can step the value up to 10, 100, and 1000 (1E3), or down to 0.1 and
0.01.
3. Press and hold both buttons simultaneously to restore the value to U:1.0
Page 62
Rotary
Left
Switch
Arrow
Position
9
Off
Pointek CLS500 – INSTRUCTION MANUA
Description
Stepsize Update Value
Factory setting
a
, is
Values
Range: 0.01 to 1000
U: 1
7ML19985GG03
Advertisement
Table of Contents
