Gilson Pipetman Ultra U2 User Manual page 25

- maintain the tip-ejector
holder in the fully
extended position by
holding down the tip-
ejector button,
- insert the tool (side
marked "UP" facing you)
into the space between
the cover and the tip-
ejector holder,
- push fi rmly in the direction
shown by the arrow, then
gently lever the cover up-
wards from the pipette.
Cover
(Battery compartment)
3) Pull out the battery block (yellow plastic) and
put in a secure bin for recycling.
4) Insert the new battery block into the battery
compartment.
5) Refi t the battery compartment cover.
6) The pipette displays "Init 3". See the Appendix for
resetting the pipette.
Battery holder
25