Table of Contents
Advertisement
Tip Roller 4,5 / 5,4 / 6,3m (excl. 6,3 m w/620mm cambridge)
10/07-2018
5. Spring-Board
The Spring-Board requires a double-acting oil outlet on the tractor. The tine angle is hydraulically
controlled from the driver's cap, with manual depth control. The tines work independently of each other,
but can be coupled together by means of a transverse locking fittings (accessories), if a greater levelling
output is required. The replacement is done easily and without use of any tools.
5.1 Installation of Cylinder on the Spring-Board
The hydraulic cylinders are installed as shown below. It is important that they are installed correctly in
order to achieve the proper force of the cylinders.
The ring type determines whether the cylinders must be installed in hole 1 or hole 2. If the machine is
with 450 or 550 mm rings, the cylinders must be installed in hole 1 and hole 1a or 1b. If the machine is
with 620 mm rings, the cylinders must be installed in hole 2 and hole 2a or 2b.
18
Advertisement
Table of Contents
