SC&T IP03PT Manual

IP03P POE Extender is designed to send and extend Ethernet network with POE can be established using existing cables up to
500M. You can use a two-wire cable (UTP cable, coax cable, telephone line, antenna cable, or bell wire) that is no longer in use
to connect a 10/100Mbps POE device, IP telephone, PC...etc without having to lay any new cables.
through POE to allow a single POE source, such as a POE network switch (IEEE 802.3af/at) to provide power to both TX/RX and the
IP/POE camera use. It is perfect solution for extended distance data and power transmission for warehouses, parking lots,
campuses, casinos and many more.
IP03 3 3 3 P P P P POE IP0 IP0 IP0 POE POE Extender POE Extender over Two Wire Extender Extender
Extend Ethernet or any TCP/IP devices up to 2Km.
Ethernet and POE data over any two wire cable: UTP, Coax, telephone, bell, alarm, power cables.
Data transfer distance up to 500M, data rate is up to 30Mbps based on distance.
Support 10/100 Mbps transmission rate.
Flexible power source either POE Switch or external DC power adapter option. (order separately)
Provides pass-through POE up to IEEE802.3at 30W.
Support high power POE to PTZ cameras at long distances.
Connected devices are supplied with up to 7W via POE.
IP03P Power Source Option Model: IP03P Power Source Option Model:
IP03P Power Source Option Model: IP03P Power Source Option Model:
DC48V 40W power adapter: ADP480830R DC48V 40W power adapter: ADP480830R
DC48V 40W power adapter: ADP480830R DC48V 40W power adapter: ADP480830R
DC56V 70W power adapter: SWP551260 DC56V 70W power adapter: SWP551260
DC56V 70W power adapter: SWP551260 DC56V 70W power adapter: SWP551260
POE Injector/POE Switch: IP05I, IP05H POE Injector/POE Switch: IP05I, IP05H POE Injector/POE Switch: IP05I, IP05H POE Injector/POE Switch: IP05I, IP05H
High Power POE Injector/ POE Switch: IP06I, IP06H High Power POE Injector/ POE Switch: IP06I, IP06H High Power POE Injector/ POE Switch: IP06I, IP06H High Power POE Injector/ POE Switch: IP06I, IP06H
Installation View: Installation View:
Installation View: Installation View:
1. Connect IP03PT, IP03PR with any two wire cable at both ends before powering.
2.Power input source could use POE Injector/Switch either optional DC 48V, DC56 power adapter to IP03PR unit and
camera use.
IP03PT with
IP03P POE Extender over Two Wire IP03P POE
IP03P POE IP03P POE
over Two Wire over Two Wire over Two Wire
POE switch power input to IP03R and POE switch power input to IP03R and POE
POE POE switch power input to IP03R and switch power input to IP03R and
P03PT with P03PT with P03PT with
Extender over Two Wire
Extender over Two Wire Extender over Two Wire
POE camera camera
POE POE camera camera
Extended pass
1