• Priority Off - does not check for priority channels.
• Priority DND - checks Priority channels every 2 seconds
only when not receiving. If you set Priority mode to Priority
DND, the scanner turns on the
searching.
• Priority Scan - checks Priority channels every 2 seconds. If
you set mode to Priority Scan, the scanner turns on the PRI
icon during scanning or searching.
• Priority Plus - scans only Priority channels in enabled banks.
If you set Priority mode to Priority Plus, the scanner turns
on the PRI+ icon during scanning or searching.
• Exit - Return to previous mode.
Note: If no Priority channels are enabled for scan, Priority Scan
No Channel displays and Priority mode is set to Off .
MANUALLY SELECTING A CHANNEL
You can continuously monitor a single channel without
scanning. This is useful if you hear an emergency broadcast on a
channel or if you want to monitor a specifi c channel.
1.
To manually select a channel, press Hold and enter the
channel number.
2.
Press Hold again.
Locking Out Channels
You can increase the scanning speed by locking out channels
that have a continuous transmission.
While receiving a channel or while in Scan Hold mode, press
L/O once to temporarily lock out the channel. Temporary L/O
icon during scanning or
PRI
43