General Safety Instructions - OnRobot VG10 User Manual

VG10 User Manual 1.1.0

General safety instructions

Generally, all national regulations, legislations and laws in the country of installation
must be observed. Integration and use of the product must be done in compliance with
precautions in this manual. Particular attention must be paid to the following
warnings:
DANGER
• You must read, understand and follow all safety information in
• Robot applications must be constructed in such way that a loss
• Identify how often the filters needs service and schedule
• Bolts that are insufficiently secured or repetitive overloads can
• The VG10 must not be used for collaborative applications
• The information in this manual does not cover designing,
• Any safety information provided in this manual must not be
•
Page 32 of 40
this manual, and the robot manual and all associated
equipment before initiating robot motion. Failure to comply
with safety information could result in death or serious injury.
of grip, for whatever reason, does not result in any injury to
humans or animals.
maintenance with a fixed period short enough to ensure a firm
grip at all times. An overall inspection of the VG10 must be
performed regularly and at least once every 6 months.
cause the product to separate unexpectedly.
where the work item itself represents a hazard. Necessary
measures must be taken to avoid changes in work items which
has not been addressed by the risk assessment.
installing and operating a complete robot application, nor does
it cover other peripheral equipment that can influence the
safety of the complete system. The complete system must be
designed and installed in accordance with the safety
requirements set forth in the standards and regulations of the
country where the robot is installed.
construed as a warranty, by OnRobot A/S, that the robot
application will not cause injury or damage, even if robot
application complies with all safety instructions.
OnRobot A/S disclaims any and all liability if the VG10 is
damaged, changed or modified in any way. OnRobot A/S cannot
be held responsible for any damages caused to the VG10, the
robot or any other equipment due to programming errors or
malfunctioning of the VG10.