The Data Transfer For Multiple Cameras - JAI CM-200GE User Manual

CM-200GE/CM-200GE-RA/CB-200GE/CB-200GE-RA

8.4.3 The data transfer for multiple cameras

8.4.3.1 If delayed readout is not used in continuous mode
♦
The packet delay should be set larger. The data traffic is controlled by the
buffer of the hub. It is necessary to check the buffer value of the unit.
8.4.3.2 If delayed readout is not used in trigger mode
♦
The packet delay should be set larger. The data traffic is controlled by the
buffer of the hub. It is necessary to check the buffer value of the unit.
- 33 -