CV-S3200/3300 DECLARATION OF CONFORMITY AS DEFINED BY THE COUNCIL DIRECTIVE 89/336/EEC EMC (ELECTROMAGNETIC COMPATIBILITY) WE HEREWITH DECLARE THAT THIS PRODUCT COMPLIES WITH THE FOLLOWING PROVISIONS APPLYING TO IT. EN-50081-1 EN-50082-1...
CV-S3200/3300 Table of Contents Table of Contents Table of Contents Table of Contents Table of Contents CE declaration ......................1. General........................2. Main features ......................3. Standard composition ................... 4. Pin assignment ...................... 5. Functions and operations ..................5-1 SW1 switch on PK8167 board ..............
The CV-S3200 comes with D-sub connector. The camera set-up can be performed via the JAI software platform and an RS232C port, or from a new on-screen menu that can be controlled by the three buttons mounted on the rear of the camera.
CV-S3200/3300 3. Standard compositions Camera main body C-mount adaptor (MP-55) Auto iris lens pulg (E4-191J-100) 4. Pin assignment 4-1. DC IN/SYNC/RS-232C connector a) 9 pin D-sub connector for CV-S3200 Ground +12V DC input Ground VBS output 4-40 UNC Thread Sync input...
CV-S3200/3300 4-2. S-VIDEO connector Ground Ground Y output C output 4-3. LENS connector +9V / Damp- NC / Damp+ Iris / Drive+ Ground / Drive- 5. Functions and operations 5-1. SW1 switch on PK8167 board This switch is to select the type of auto iris. It is located on the CCD board (PK8167), as below.
CV-S3200/3300 5-2. On-screen-menu On-screen-menu can be controlled by the “UP”, “DOWN” and “FUNC” switches on the rear panel. 5-2-1. Functions The following functions are adjustable at on-screen-menu. White balance Shutter Gain Back light compensation Lens iris Gamma Scanning reversal Sensitive mode...
Page 8
CV-S3200/3300 b) Shutter This function is used for “freezing” objects and for light regulations. Nine exposure time settings are available. 1/60 sec. (NTSC), 1/50 sec. (PAL) Selectable shutter 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000, 1/20,000, 1/40,000 sec. Flicker-less 1/100 sec. (NTSC), 1/120 sec. (PAL) CCD iris Shutter speed changes automatically.
Page 9
CV-S3200/3300 d) BLC (Back Light Compensation) BLC circuit will c0mpensate for extreme highlights in the field of view. There are three pre-defined patterns that can be selected. These are shown below. The higher the value, the more backlight compensation. Patten 3...
Page 10
CV-S3200/3300 f ) Gamma This function is to set the gamma correction. 0.45 Correction Correction Linear Note : Factory pre-set is 0.45. g) Scanning reversal (mirror-effect mode) This function can change the horizontal scanning between normal and reverse. Normal scanning Reversal scanning Note : Factory pre-set is set at OFF.
CV-S3200/3300 5-2-2. Operations Screen display (example) Function buttons for on-screen-menu Rear panel of CV-S3300 (example) Note : This scroll bar will be displayed when the following functions are selected. White balance = manual, AGC = manual, Iris = manual To start adjustment, push the “FUNC” button. The menu will appear on the monitor . (See page 12) Use “UP”...
CV-S3200/3300 8. Appendix 8-1 Precautions Personnel not trained in dealing with similar electronic devices should not service this camera. The camera contains components sensitive to electrostatic discharge. The handling of these devices should follow the requirements of electrostatic sensitive components.
1. This manual can be downloaded from www.jai.com 2. Datasheet can be downloaded from www.jai.com 3. Camera control software can be downloaded from www.jai.com 4. Data for the CCD sensor can be found on www.jai.com 9. User’s Record Camera type:...
Page 16
Fax +44 1895 824433 www.jai.com www.jai.com JAI Corporation, Japan JAI PULNiX Inc., USA Phone +81 45 440 0154 Phone (Toll-Free) +1 800 445 5444 Fax +81 45 440 0166 Fax +1 408 383 0301 www.jai.com www.jai.com Visit our web site on www.jai.com...