Hakki Pilke 38 Pro PTO Instructions Manual page 16

16 / 40
Figure 19.
Release the lock of the conveyor by pushing lever A towards the conveyor, and turn the conveyor to the
desired position with handle B.
If hydraulic turning of the conveyor (optional) is available, you can use control lever D (Figure 10) to swivel the
conveyer laterally. In other words, turning the lever forwards swivels the conveyer to the left, and turning
the lever backwards swivels the conveyer to the right.
The maximum operating angle for the out-feed conveyor is 40°. The maximum angle is indicated on the label
below and in the instructions attached to the out-feed conveyor.
Hakki Pilke 38 Pro Translation Version 3