Cleaning & Disinfecting; General Information - Verathon GlideScope Operation & Maintenance Manual

CLEANING & DISINFECTING

GENERAL INFORMATION

WARNING
Because the product may be contaminated with human blood or body fluids capable of
transmitting pathogens, all cleaning facilities must be in compliance with (U.S.) OSHA Standard
29 CFR 1910.1030 "Bloodborne Pathogens" or an equivalent standard.
WARNING
Availability of cleaning, disinfection, and sterilization products varies by country, and Verathon
is unable to test products in every market. For more information, please contact Verathon
Customer Care. For contact information, visit verathon.com/support.
WARNING
This product may only be cleaned, disinfected, or sterilized by using the approved low‑temperature
processes provided in this manual. Cleaning, disinfection, and sterilization methods listed are
recommended by Verathon based on efficacy or compatibility with component materials.
WARNING
Ensure that you follow the manufacturer's instructions for handling and disposing of the
cleaning and disinfection solutions provided in this manual.
WARNING
Cleaning is critical to ensuring a component is ready for disinfection or sterilization. Failure
to properly clean the device could result in a contaminated instrument after completing the
disinfection or sterilization procedure.
When cleaning, ensure all foreign matter is removed from the surface of the device. This allows
the active ingredients of the chosen disinfection method to reach all the surfaces.
WARNING
Do not place the video baton in the cradle if any of the components are contaminated.
36
®