Verathon GlideScope Operation & Maintenance Manual page 26

ATTACH THE MONITOR TO THE MOBILE STANd OR IV POLE
1. If you are using the GlideScope premium cart or AVL portable stand, assemble it according to the
instructions included with the component.
2. If you are using an IV pole mount, place the mounting bracket on the IV pole, and then tighten the
bracket attachment knob until the IV pole mount is secure.
3. On the mobile stand mount or the IV pole mount, ensure that the locking pin and quick‑release lever are
in the unlocked (horizontal) position.
4. While holding the quick‑release locking plate with the head of the mounting screw facing away from
you and the larger of the two flanges to your left, Insert a positioning pin into the right‑hand hole on the
locking plate as shown in the following image.
18
Bracket attachment knob
Quick‑release lever
in unlocked position
Locking pin in
unlocked position