Stratasys uPrint Service Manual page 241

16.
Measure and record the diameter of circle F along the center line between C and I. See
Figure 5-339.
17.
Add the lengths derived from steps
of circle F derived from step 16. Record this total as "Right"
18.
Measure and record the distance from the outside edges of circles A and D. See
340.
Figure 5-340: Measuring distances from outside edges of A and D
19.
Measure and record the distance from the outside edges of circles D and G. See
341.
Figure 5-341: Measuring distances from outside edges of D and G
20.
Measure and record the diameter of circle D along the center line between A and G. See
Figure 5-342.
5-32
Figure 5-339: Measuring diameter of circle F
14 and 15 (C-F and F-I) and then subtract the width
Figure 5-
Figure 5-