Stratasys uPrint Service Manual page 237

28.
Add the lengths derived from steps
of circle E derived from step 27. Record this total as "GLR"
29.
Measure and record the distance from the outside edge of circle A to the outside edge of
circle E. See Figure 5-330.
Figure 5-330: Measuring distances from outside edges of A and E
30.
Measure and record the distance from the outside edge of circle E to the outside edge of
circle I. See Figure 5-331.
Figure 5-331: Measuring distances from outside edges of E and I
31.
Measure and record the diameter of circle E along the center line between A and I. See
Figure 5-332.
5-28
25 and
Figure 5-332: Measuring diameter of circle E
26 (C-E and E-G) and then subtract the width