Setting The Alarms; Snooze Function - Goodmans 336723 User Manual

3 Quick Setup

3.10 Setting the Alarms

This unit is equipped with two independent alarms.
The following steps will assume the clock has been set already and the unit is in
STANDBY mode.
Setting Alarm 1/ 2 from the remote control
Press and hold the ALARM 1 or ALARM 2 button (22,32) to initiate the alarm
1.
setting function. You will see the corresponding alarm icon appear on the display
and the hour digit will flash.
Set the hour digits by pressing either of the
2.
Once the hour has been set press the ALARM 1 or2 button again to move onto
the minute setting. Use the same process to set the minutes.
Press the ALARM 1 or 2 button once more to complete the time setting.
You will now see BU appear on the display. Use the
3.
from BU (buzzer), CD or RAD (radio).
The CD or RADIO alarm volume level is set using the VOLUME+/- buttons (1/2,
27/36).
Press the ALARM 1or 2 button to complete the alarm setting.
4.
To activate or deactivate an alarm press the relevant alarm button eg:- ALARM 1
5.
or 2 (22, 32).
NOTE: Pay attention to the alarm icons on the display. If the icon is not present the
alarm is inactive.
To disable the alarm when sounding press the STOP/ AL OFF button (9), or press
6.
either ALARM 1 or 2 button.

3.11 Snooze Function

Should you wish to delay the alarm for 9 minutes you can activate the SNOOZE
function.
When the alarm sounds press either SNOOZE button (1,2,29) to delay the alarm
1.
for 9 minutes.
After one hour of snoozing the SNOOZE function will no longer operate.
2.
336723
/ buttons (12/13, 25/34).
/ buttons to select