Sleep Function; Operation; Searching Tracks - Goodmans 336723 User Manual

3 Quick Setup

3.12 Sleep function

Should you wish to set a timer for the unit to enter standby mode after a period of
time follow the steps below.
Ensure the unit is ON and not in STANDBY.
1.
Press the SLEEP button (6, 29) repeatedly to cycle through the preset timers
2.
from 90 minutes to 10 minutes then OFF.
When you have selected the required timer duration, after 1 second of inactivity
3.
the setting will be stored and the countdown will begin.
4

Operation

4.1 Basic CD Operation
Press the FUNCTION button (4, 20) repeatedly until you see 'Cd' appear on the
1.
top of the display.
Press the EJECT button (11,28) to open the CD door.
2.
Load a CD with the label facing outwards and press the EJECT button again to
close the door.
The EJECT function only operates in CD mode.
NOTE: You may need to angle the disc and slide the top half into the unit before
mounting the disc on the mechanism.
DO NOT push the door downwards to close.
Play a Disc
4.2
Once loaded the unit will read the disc contents and begin playback. Pause
1.
playback by pressing the PLAY/PAUSE button (10,23) once. To resume
playback press the PLAY/PAUSE button again.
To stop playback press the STOP button (9,24).
2.
4.3
Skip Tracks
Press the SKIP
1.
Press the SKIP
2.
4.4

Searching Tracks

Press and hold the SKIP button
1.
playing.
Press and hold the SKIP button
2.
playing.
button (13, 34) to skip to the next track on the disc.
button (12, 25) to skip to the previous track.
(13,34) to fast forward the current track
(12, 25) to fast rewind the current track
336723