Quick Setup - Goodmans 336723 User Manual

3

Quick Setup

3.1 Fitting the Remote Battery
Before use, the remote control will need batteries fitting.
Remove the battery compartment lid as shown.
Fit 2xAAA batteries as shown. Take care to match the polarities of the remote to the
batteries.
EG: the +sign on the battery matches the + sign on the remote control battery
compartment.
Replace the battery compartment lid and proceed to use.
NOTE: Dispose of used batteries with regards to the recycling regulations in your
area.
Do NOT short circuit batteries or throw them into water, the general rubbish or in a
fire.
3.2 Connecting the Power
Weak batteries can leak and damage the remote control. Replace them in good
time.
Connect the mains adaptor to a UK mains outlet.
3.3 Standby & Auto Standby
Insert the plug into a power socket and switch the power on.
Press the STANDBY button on either the main unit or remote control.
Press the STANDBY button to wake from standby mode.
Press the STANDBY button again to enter standby mode.
Due to new ECO regulation requirements this product incorporates a power saving
feature.
When in CD, BT or AUX mode, once audio playback has ceased and the unit has
stood idle for approximately 20 mins, it will switch into a "power down" power saving
mode.
To wake the unit up, press the STANDBY button.
336723