Goodmans 336723 User Manual page 12

4 Operation
4.9 LINE Input mode
You can connect an audio device to the unit using a 3.5mm audio cable (not
supplied).
Connect the 3.5mm plug (not supplied) into the Audio Input socket on the rear of
1.
the unit (14).
Connect the other end to your audio device.
2.
Press the FUNCTION button (4,20) repeatedly until you see Line In appear on the
3.
display.
Power on the external audio device and begin playback.
4.
Adjust the volume on the CD Micro system unit.
5.
NOTE: it is recommended to try various volume levels on the external audio device
until you reach an acceptable balance.
Too much volume and the audio will be distorted, too little and the audio will be too
weak.
The actual volume level is controlled on the unit, using the VOL + / - buttons.
4.10
Pairing with other Bluetooth source devices:
Press the STAND-BY button(3,19) to turn the power on.
1.
Press the FUNCTION button (4,20) to select Bluetooth function.(PAIRING indicator
2.
blinks.)
Press and hold the PAIRING button(10.24) for 3 seconds or more. PAIRING
3.
indicator blinks quickly.
The unit is now in pairing mode and is ready to be paired with other Bluetooth
source devices.
Perform pairing procedure on the source device to detect this
4.
unit."GoodmansHiFi" will appear in the detected devices list (if available) in the
source device.
336723