Table of Contents
Advertisement
4.2
INSTALLATION
Speakers:
1. The speakers can be attached to the Hi-Fi System by sliding
them on to the brackets on either side of the Hi-Fi.
2. The speakers can also be placed apart from the Hi-Fi
System.
3. Ensure that the speaker cables are correctly inserted into the
corresponding left and right speaker inputs (located on the
right-hand side of the Hi-Fi System).
4.3
SETTING
Setting The Clock:
1. In standby mode, press and hold the Time Set button, and
M-DN
then press Skip + and Skip – to select the desired time
ALARM
setting.
TIME
2. You can choose between a 24 hour and 12 hour time setting.
Press the Time Set button to confirm.
3. Use the Skip + and Skip – buttons to select the required
hour, and then minutes.
4. Press the Time Set button again to confirm.
4.4
Setting The Alarm:
M-DN
ALARM
1. In standby mode, press the AL.SET button on the control
panel or press the ALARM button on the remote.
TIME
2. The alarm icon and hour time will flash on the screen.
3. Use the SKIP + and SKIP - buttons to select the required
hour. Press the AL.SET or ALARM button to confirm.
4. Use the SKIP + and SKIP – buttons to select the required
minutes.
5. After setting the required alarm time, press the AL.SET or
ALARM button.
6. You can now select buzzer, radio or CD alarms.
• Buzzer:
The default setting.
• Radio:
Press the SKIP+ and SKIP– button until FM is
shown on the display screen. When the alarm
sounds, it will play the last visited radio station.
• CD:
Press the SKIP + and SKIP – buttons until the CD
icon is shown on the display screen. This feature
will only work if a CD is in the CD drive. When the
alarm sounds the CD will be played.
7. Press the AL.SET button to confirm your settings.
8. To turn off the alarm, press the STANDBY button.
OPEN
FUNCTION
MUTE
+
MODE
-
M-UP
MEMORY
PROG
SNOOZE
SLEEP
FUNCTION
MUTE
+
MODE
-
M-UP
MEMORY
PROG
SNOOZE
SLEEP
COMPACT BLUETOOTH HI-FI SYSTEM
Advertisement
Table of Contents
