Setting The Clock; Setting The Timer; Displaying The Time; Setting The Sleep Timer - Goodmans GMN10040MP3 Instruction Manual

T I M E R
and clock

Setting the clock

GMN10040MP3

Displaying the time

Setting the sleep timer

Set the main unit to automatically switch off after a specified time.
If you want to cancel the SLEEP function, press the button repeatedly until "SLEEP"
is no longer shown in he display.
18
Switch off the stereo system.
Enter clock-set mode, the hour digits
flash.
Set the current hour
Store the hour digits and switch to the
minute digits.
Set the current minutes.
Start the clock and exit clockset mode.
With the power turned on press this
button to show the time for approx. 4
seconds.
Select the SLEEP function.
Every time the sleep button is pressed the
time is reducuce from 90 minute to 10
minute also then off.
Be sure the clock is set accurately.

Setting the timer

Select the Timer or Record timer function.
(Timer display disappears after about 9 seconds.)
Press repeatedly to select the source to be used when the system turn
on.
Save source setting.
Set the hour the unit is to switch on.
Switch to the minute digits.
Set the minutes the unit is to switch on.
Switch to volume setting.
Set the volume between (MIN.) 1 and 28 (MAX.),
Switch to the time the main unit is to switch off again.
Set the amount of minute the unit is to play for before turning off.
Save the setting and turn the timer mode on.
Timer (record) stand-by on / off
Press the button repeatedly to switch :
Timer recording from a connected device or station :
Set the timer as above. Load a tape with enough space and with safety tab still intact into TAPE 2.
Then set timer standby to .
T I M E
a n d c l o c k
timer stand-by to play
timer record stand-by to record.
timer disable.
R
19