Sound Controls; To Set The Clock Time; Setting The Timer - Goodmans 4225MP3 Instruction Manual

ADJUSTING THE SOUND
To increase the volume, press the VOLUME UP on the remote or twist the volume control clockwise.
To decrease the volume, press the VOLUME DOWN on the remote or twist the volume control anti-
clockwise.
MUTING THE SOUND
Press the MUTE button to mute the volume. Press the MUTE button again to restore the volume to the
previous level.
SELECTING A PRESET EQUALIZER
The preset equalizer can be used to add enhanced effects to the audio output. The available effects
are JAZZ, CLASSIC, ROCK, POPS and FLAT (normal/off). Press the relevant button for the required
effect.
BASS BOOST
Press the X-BASS button to enhance the bass output of the audio.
HEADPHONES( NOT INCLUDED)
Connect the headphones to the Headphones socket (3.5mm) on the front of the unit. The sound from
the speakers will be turned off automatically.
CAUTION: SET THE VOLUME TO A LOW LEVEL BEFORE PUTTING ON THE HEADPHONES.
GRADUALLY ADJUST THE VOLUME TO A COMFORTABLE LISTENING LEVEL. PLEASE DO NOT
PLAY THE VOLUME TOO LOUDLY FOR EXTENDED PERIODS OF TIME FOR OTHERWISE
IRREVERSIBLE DAMAGE WILL BE DONE TO THE LISTENERS EARS.
1. Press the POWER Button to turn on the unit.
2. Press the clock mode button, the clock will flash in the display.
3. Whilst the clock is flashing, press the HOUR/FOLDER UP button to adjust the hour digits to the
current time.
4. Whilst the clock is flashing, press the MINUTE/FOLDER UP button to adjust the minute digits to
the current time.
5. Press the PROGRAM/MEMORY button to set the clock. The clock will then stop flashing.
SETTING THE TIMER-ON TIMER
1. press the Power button to turn on the unit.
2. Press the Clock/Mode button twice. The TIMER ON indicator will flash in the display
3. Press the Hour button to change the Hour setting. Press the Minute button to change the Minute
setting.
4. Press the Program/Memory button to enter the time into memory.
SETTING THE TIMER-OFF TIMER
1. Press the POWER button to turn on the unit.
2. Press Clock/Mode button three times. The TIMER OFF indicator will flash in the display.
3. Press the Hour button to change the Hour setting. Press the Minute button to change the Minute
setting.
4. Press the Program/Memory button to enter the time into memory.

SOUND CONTROLS

TO SET THE CLOCK TIME

SETTING THE TIMER

- 14 -