Repeat & Random Function; Program Function - Goodmans 336723 User Manual

4 Operation
4.5 Repeat & Random function
Press the PLAY MODE button (21) once to repeat the current track. You will see
1.
flash on the top right portion of the display.
Press the REPEAT button again to repeat the entire disc. You will see the
2.
on the top right portion of the display stop flashing and remain solid.
Press the REPEAT button once more to enter RANDOM playback mode. This
3.
function will playback all tracks on the current disc in a random order.
You will see 'RAN' appear to the right of the time code.
Press the REPEAT button once more to cancel any repeat functions and resume
4.
normal playback. All icons will disappear.

Program function

4.6
You can program an alternative playback sequence for up to 20 tracks on a single
disc.
First press the STOP button if a disc is playing.
1.
Press the PROG. button (8,23). You will see 'PROG' flash on the right of the
2.
display & P-01 appear to indicate program mode operation.
Press either
3.
position one.
Press the PROG. button to store the track.
4.
Repeat steps 3-4 until you have programmed all the tracks you wish to play.
5.
Press the PLAY/PAUSE button to begin playback of your programmed sequence.
6.
To delete the program press the STOP button twice.
7.
You will notice the 'PROG' icon disappears from the display.
4.7 Radio Station Full Scan
Before tuning the radio extend the antenna (16) fully.
Press the FUNCTION button (4,20) repeatedly until you see a radio frequency
1.
appear on the display EG:-89:60.
To manually scan for radio stations press and hold either of the buttons
2.
(12/13, 25/34) for two seconds to scan down or up the frequency band. When a
station is found the scan will stop and the station will begin to play.
336723
/ buttons to select the track number you wish to play in
icon