Table of Contents
Advertisement
S
S
UPER
ERVER 1017R-WR User's Manual
PCI Error Logging Support
Select Enabled to support error event logging for PCI Slots. The options are En-
abled and Disabled.
Poison Support
Select Enabled for Poison support. The options are Enabled and Disabled.
SATA Configuration
When this submenu is slected, the AMI BIOS automatically detects the presence
of IDE or SATA devices and displays the following items.
SATA Port0~SATA Port5
The AMI BIOS displays the status of each SATA port as detected by the BIOS.
SATA Mode
Use this feature to configure SATA mode for a selected SATA port. The options are
Disabled, IDE Mode, AHCI Mode, and RAID Mode. The following are displayed
depending on your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
Serial-ATA (SATA) Controller 0~1
Use this feature to activate or dactivate the SATA controller, and set the
compatibility mode. The options for Controller 0 are Enhanced and Compat-
ible. The default setting for SATA Controller 1 is Enhanced.
AHCI Mode
The following items are displayed when the AHCI Mode is selected:
Aggressive Link Power Management
Select Enabled to enable Aggressive Link Power Management to support
Cougar Point B0 stepping and beyond. The options are Enabled and
Disabled.
Port 0~Port 5 Hot Plug
Select Enabled to enable hot-plug support for a port specified by the user
so that the user is allowed to change a hardware component or a device
without shutting down the system. The options are Enabled and Disabled.
7-14
Advertisement
Table of Contents
