Table of Contents
Advertisement
S
S
UPER
ERVER 1017R-WR User's Manual
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
hard drive LED cable to display SATA/
IDE disk activity. Refer to the table on
the right for pin definitions.
NIC1 LED
The NIC1 (Network Interface Control-
ler) LED connection is located on pins
11 and 12 of JF1. Attach the NIC1
LED cable to display network activity.
Refer to the table on the right for pin
definitions.
NIC2 LED
The NIC2 (Network Interface Control-
ler) LED connection is located on
pins 9 and 10 of JF1. Attach the NIC2
LED cable to display network activity.
Refer to the table on the right for pin
definitions.
Overheat (OH)/Fan Fail/UID LED
Connect an LED cable to the Front
UID and OH/Fan Fail connections on
pins 7 and 8 of JF1 to display UID
(Unit ID) signals or to provide ad-
vanced warnings for chassis overheat/
fan failure. Refer to the table on the
right for pin defi nitions.
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to the table on the right for pin defini-
tions.
Pin Definitions (JF1)
Pin#
13
14
Pin Definitions (JF1)
Pin#
11
12
Pin Definitions (JF1)
Pin#
9
10
OH/Fan Fail Indicator
State
Off
On
Flash-
ing
Pin Definitions (JF1)
Pin#
5
6
5-16
HDD LED
Definition
Vcc
HD Active
NIC1 LED
Definition
Vcc
Ground
NIC2 LED
Definition
Vcc
Ground
Status
Definition
Normal
Overheat
Fan Fail
Power Fail LED
Definition
Vcc
Ground
Advertisement
Table of Contents
