Table of Contents
Advertisement
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to the hardware reset switch on the
computer case. Refer to the table on
the right for pin definitions.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. This button
can also be configured to function
as a suspend button (see the Power
Button Mode setting in BIOS). To turn
off the power when set to suspend
mode, depress the button for at least
4 seconds. Refer to the table on the
right for pin definitions.
Universal Serial Bus Ports
Four USB 2.0 ports are included with
the rear I/O ports. There are also four
USB 2.0 ports on two headers that
can be used to provide front chassis
access (see board layout for loca-
tions) See the tables on the right for
pin definitions.
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach the appropriate cable
to inform you of a chassis intrusion.
Chapter 5: Advanced Serverboard Setup
Pin Definitions (JF1)
Pin#
3
4
Pin Definitions (JF1)
Pin#
1
2
Front Panel USB Port
Header Pin Definitions
Pin #
Definition
1
+5V
3
USB_PN2
5
USB_PP2
7
Ground
9
Key
Rear I/O USB Port
Pin Definitions
Pin# Definition
1
+5V
2
USB_PN1
3
USB_PP1
4
Ground
Chassis Intrusion
Pin Definitions
Pin#
1
2
5-17
Reset Button
Definition
Reset
Ground
Power Button
Definition
PW_ON
Ground
Pin #
Definition
2
+5V
4
USB_PN3
6
USB_PP3
8
Ground
10
Ground
Pin#
Definition
5
+5V
6
USB_PN0
7
USB_PP0
8
Ground
Definition
Intrusion Input
Ground
Advertisement
Table of Contents
