Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 1017R-WR.
Installation and maintainance should be performed by experienced technicians only.
The SuperServer 1017R-WR is a 1U rackmount server based on the SC514-R400W
chassis and the X9SRW-F motherboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the X9SRW-F motherboard and
the SC514-R400W chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the 1017R-WR into a rack and
check out the server configuration prior to powering up the system. If your server
was ordered without processor and memory components, this chapter will refer you
to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 1017R-WR.
Preface
iii
Preface
Advertisement
Table of Contents
