Huawei AR1200 Series User Configuration Manual page 213

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Issue 04 (2012-05-15)
1. Run an FTP server program (for example, WFTPD32) on a terminal or PC, specify
the directory of the system file, and configure an FTP user name and password
according to Step
2. Log in to the router from the console port. For details, see
Device Through the Console
3. Restart the router. Press Ctrl+B to enter the BootROM menu when the following
information is displayed.
Sep 16 2011,17:14:28
Copying Data : Done
Uncompressing : Done
Initializing SMI Bus:OK
Init flash, please wait......
Base Address: 0xfffffffffc000000
Size is: 0x20000000OK
flash drv init.
Initializing FlashPiece Module:
FlashPiece start offset at: 0x300000
FlashPiece size is: 0x100000
Initializing FlashDynamic Module:
FlashDynamic start offset at: 0x400000
FlashDynamic size is: 0x200000
Initializing I2C Bus:OK
USB2 Host Stack Initialized.
USB Hub Driver Initialized
USBD Wind River Systems, Inc
EHCI Controller found.
Waiting to attach to USBD...0xbfffdf0 (tRootTask): usb1_base =
0xbff22000Done.
0xbfffdf0 (tRootTask): usbBulkDevInit() returned OK
Press Ctrl+B to break auto startup ... Attached TCP/IP interface to teth1.
NOTE
l To access the BootROM menu, you must enter the initial password huawei after pressing
Ctrl+B.
4. Select choice 3 to enter the network menu.
Enter Password:
Main Menu
1. Default Startup
2. Serial Menu
3. Network Menu
4. Startup Select
5. File Manager
6. Reboot
Enter your choice(1-6):3
5. Select choice 2 to modify parameters.
NetWork Menu
1. Display parameter
2. Modify parameter
3. Save parameter
4. Download file
0. Return
Enter your choice(1-10): 2
Configure the FTP service type, system file name, network management interface
address, FTP server address, FTP user name, and FTP password.
NOTE:
Ftp type define:
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.
Port.
0(ftp), 1(tftp),
9 Upgrade and Maintenance
1.2 Logging In to the
201