Huawei AR1200 Series User Configuration Manual page 111

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Figure 5-11 Establishing the configuration environment over the WAN
PC
Configuration Roadmap
1.
2.
3.
Data Preparation
l
l
l
l
Procedure
Step 1 Connect the PC and the router to the network.
Step 2 Set login user parameters on the target router.
# Configure the login address.
<Huawei> system-view
[Huawei] interface ethernet 1/0/0
[Huawei-Ethernet1/0/0] ip address 202.38.160.92 255.255.0.0
[Huawei-Ethernet1/0/0] quit
# Configure the login authentication mode
[Huawei] aaa
[Huawei-aaa] local-user huawei password cipher hello
[Huawei-aaa] local-user huawei service-type telnet
[Huawei-aaa] local-user huawei privilege level 3
[Huawei-aaa] quit
[Huawei] user-interface vty 0 4
[Huawei-ui-vty0-14] authentication-mode aaa
Step 3 Configure the client login.
Run the Telnet on the PC (use the Windows XP operating system as an example), as shown in
Figure
Issue 04 (2012-05-15)
Router
Establish the physical connection.
Set user login parameters.
Log in to the router from the client side.
IP address of the PC
IP address of the Ethernet interface on the router
User information (including the user name, password, and authentication mode)
Reachable route between the PC and target router
5-12.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Eth1/0/0
202.38.160.92/16
WAN
Target
Router
5 Configuring User Login
99