Sending Messages To Other User Interfaces; Displaying Login Users - Huawei AR1200 Series User Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Context
The user interface can be a console user interface or a VTY user interface.
Procedure
Step 1 Run:
lock
The user interface is locked.
Step 2 Step 2 Follow the system prompts and input a password to unlock the user interface.
<Huawei> lock
Enter Password:
Confirm Password:
If the locking is successful, the system prompts that the user interface is locked.
You must enter the password previously set to unlock the user interface.
----End

5.5.4 Sending Messages to Other User Interfaces

Users logged in to different interfaces can send messages to each other.
Context
Users logged in to the router can send messages from their user interface to users on other user
interfaces.
Procedure
Step 1 Run:
send { all | ui-type ui-number | ui-number1 }
You can enable message sending between user interfaces.
Step 2 Follow the prompt to view the message to be sent. You can press Ctrl_Z or Enter to end the
display, and press Ctrl_C to abort the display.
Step 3 At the system prompt, enter Y to send the message or enter N to cancel message sending.
----End

5.5.5 Displaying Login Users

You can query information about login users.
Context
User name, address, and authentication and authorization information can be queried.
Procedure
l
Issue 04 (2012-05-15)
Run the display users [ all ] command to view information about logged-in users.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring User Login
95