Huawei AR1200 Series User Configuration Manual page 211

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
l
Issue 04 (2012-05-15)
Figure 9-4 Configuring an FTP user
3. Run the ftp host [ port-number ] command on the router to log in to the PC.
NOTE
Before downloading the system file from the PC, ensure that there is enough space on the
router to store the system file. Enter the configured user name and password to log in to the
PC.
4. Run the binary command to set the file transfer mode to binary.
5. Run the get remote-filename [ local-filename ] command to download the system file
from the PC.
6. After the system file is downloaded, run the bye or quit command to terminate the
connection with the PC and return to the user view.
7. Run the dir command on the router to check whether the system file exists in the
current directory.
NOTE
If the size of the system file in the current directory on the router is different from the PC, an
error may occur in file transfer. Upload the system file again.
Uploading a system file to the AR1200 using the AR1200 as the TFTP client and the
PC as the TFTP server
NOTE
The AR1200 can function only as a TFTP client but not a TFTP server.
1. Run a TFTP server program on the PC. This procedure uses TFTP32 as an example,
as shown in Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-5.
9 Upgrade and Maintenance
199