Huawei AR1200 Series User Configuration Manual page 189

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Start the TFTP server and set its Current Directory to the directory where the ar.cc file resides.
Figure 8-8
Figure 8-8 Setting the Base Directory of the TFTP server
Step 2 Log in to the router from the computer HyperTerminal and enter the following command to
download a file.
<Huawei> tftp 10.111.16.160 get ar.cc flash:/
Info: Transfer file in binary mode.
Downloading the file from the remote TFTP server. Please wait...
second.
TFTP: Downloading the file successfully.
Step 3 Run the dir command to check whether the downloaded file is saved in the directory specified
on the router.
<Huawei> dir flash:/
Directory of flash:/
Idx
Issue 04 (2012-05-15)
The TFTP application installed on the TFTP server
The path to the file on the TFTP server
The destination file name and its path on the router
shows the interface.
NOTE
The display on your computer may be different, depending on the TFTP server application you are running.
69143936 bytes received in 42734
Attr Size(Byte)
0 -rw- 1,738,816
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Date Time(LMT)
Mar 28 2011 17:00:24
8 Accessing Another Device
FileName
web.zip
177