Establishing The Physical Connection; Logging In To The Device - Huawei AR1200 Series User Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
No.
1

1.2.2 Establishing the Physical Connection

You can use a cable to connect the console port of the router to the COM port of a terminal.
Procedure
Step 1 Power on all devices to perform a self-check.
Step 2 Use a cable to connect the console port of the router to the COM port of a PC.
----End

1.2.3 Logging In to the Device

To manage a router that is powered on for the first time, you can log in to it using the console
port.
Context
PC terminal attributes, including the transmission rate, data bit, parity bit, stop bit, and flow
control mode must be configured to match those configured for the console port. Default values
for terminal attributes are used during the first login to the device.
Procedure
Step 1 Start a terminal emulator on the PC and create a connection, as shown in
Issue 04 (2012-05-15)
Data
Terminal communication parameters
l Baud rate
l Data bit
l Parity
l Stop bit
l Flow-control mode
NOTE
The system automatically uses default parameter values for the first login.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Logging In to the System for the First Time
Figure 1-1.
3