Changing Login Users; Disconnecting From The Ftp Server - Huawei AR1200 Series User Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration

8.5.5 Changing Login Users

After logging in to an FTP server, you can change the username on the client and re-log in to
the server with the new username.
Context
If you are logged in to the AR1200 functioning as an FTP client, you can switch to a different
username and log in to the FTP server without logging out of the FTP client view. The FTP
connection established in this way is identical to that established by running the ftp command.
Perform the following steps on the router that functions as a client:
Procedure
l
----End

8.5.6 Disconnecting from the FTP Server

You can terminate the connection with an FTP server and return to the user view or FTP view.
Context
Various commands can be used from the FTP client view to terminate a connection with an FTP
server.
Do as follows on the router that serves as the client.
Procedure
l
Issue 04 (2012-05-15)
Run:
user user-name [ password ]
The user that logged in to the FTP server earlier is changed and the new user logs in to the
server.
When the username that is used to log in to the FTP server is changed, the original
connection between the user and the FTP server is interrupted.
Run one of the following commands depending on your system configurations.
– Run:
bye
Or,
quit
The client router is disconnected from the FTP server.
Return to the user view.
– Run:
close
Or,
disconnect
The client router is disconnected from the FTP server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Accessing Another Device
162