Specifications And Features - Lectrosonics Dante M2T/E01 Instruction Manual

M2T/E01

Specifications and Features

RF Power Output:
Antenna Output:
Operating Frequencies:
Frequency Selection Steps:
Frequency Stability:
Modulation:
Emission Designator:
Spurious Radiation:
Equivalent input Noise:
Latency: (overall system)
Digital Source:
Analog Source:
Audio Frequency Response:
Audio Input:
Audio Input Jack:
Dante Connection:
Ethernet Connection:
USB Connection:
IRDA:
Input impedance:
Headphone jack
Power Requirements:
Power Consumption:
Weight:
Dimensions:
Specifications subject to change without notice.
18
• Two carriers; two audio channels each
• Power adjustable on each carrier to 10, 25 or 50 mW
2 x BNC sockets
470.100 – 614.375 MHz
25 kHz
± 0.002%
8 PSK
200KG7E
Compliant with ETSI EN 300 422-1 v2.1.2
–128 dBV
1.0 ms plus Dante network (on Dante unit)
<1.4 ms
20 HZ - 15 KHZ, -3 dB
-10 dBV or +4 dBu settings w/ ±5 dB trim
4 x combo XLR/TRS connectors
2 x RJ45. Internally routable with Ultimo 4x4 module
RJ45
Micro USB on front panel for firmware updates
IR transceiver for sync of receivers
Line: 2k Ohm
1/8 inch stereo jack
9-18V DC
5 Watts
2.2 lbs (997.903 grams)
Height: 1.750 in. / 44.45 mm
Width: 8.375 in. / 212.7 mm
Depth: 7.750 in. / 196.8 m.
LECTROSONICS, INC.