1.0 Introduction; Document Organization; Related Documentation; Table 1: Manual Organization - Bosch D9412G Operations & Installation Manual

D9412G/D7412G | Operation & Installation Guide |
1.0 Introduction
This manual addresses the operation and installation of
the D9412G/D7412G Control Panels only, and should
not be used in conjunction with the D9412, D9112,
D9112B1, D7412, D7212G, D7212, or D7212B1 Control
Panels.
Throughout this guide, unless expressly stated, the
words "panel" and "control panel" refer to both panels
(D9412G and D7412G).
Section 2.1 9000G Series Panel Differences provides an
overview of the differences between the D9412G and
D7412G panels.

Table 1: Manual Organization

Section Description
1 Introduction. Information on the structure of the guide. Lists other literature related to these control panels
and describes the FCC rules with which they comply.
2 Overview. Summary of the D9412G/D7412G Control Panels, including operational specifications, standards,
and new features.
3 Installation. Instructions for connecting the power terminals, plus the status and battery LEDs.
4 Power Supply. Information on the primary and secondary modules. Instructions on connecting and
programming them.
5 Power Outputs. Information on the power outputs and instructions on installing the transformer; explains the
status and battery LEDs.
6 Telephone Connections. Instructions on connecting the phone line and programming it for use.
7 On-Board Points. Information on the on-board points and their parameters.
8
Off-Board Points. Details on the off-board points and their parameters, including the installation, wiring, and
testing of OctoPOPITs.
9 Off-Board Relays. Installation and wiring of the D8129 OctoRelay and the D811 Arm Status Relay Module.
10 Arming Devices. Description of the installation, wiring, programming, and operation of independent zone
control modules.
11 SDI Devices. Description and installation instructions for various SDI device modules.
12 Programmer and Accessory Connections. Explanation of the Programmer Connector and the Accessory
Connector.
13 Faceplates. Illustration of each of the control panels (D9412G and D7412G).
Appendix A System Wiring Diagrams. Illustrations showing the terminal wiring connections for each of the control panels.
Appendix B Point Address Charts. ZONEX point addresses for POPITS.
Bosch Security Systems | 10/03 | 43488E

1.0 Introduction

1.1

Document Organization

This guide is divided into sections and appendices,
summarized in Table 1.
1.2

Related Documentation

Table 2 is a comprehensive list of all documentation
(with part numbers) directly related to the D9412G/
D7412G Control Panels. Throughout this guide,
references are made to this documentation. If it is
necessary to obtain one (or more) of these documents,
please contact Bosch Security Systems Technical Support
and request the documentation by its corresponding part
number.
EN | 7