Sending A Fax By Automatic Dialing - Sharp FOD-C525 Networking Manual

Sending a Fax by Automatic Dialing

Dual Access
The machine features full dual access, which means that you can load a
document and dial by automatic dialing even when the machine is occupied
with another job. After you dial, your document will be immediately scanned
into memory and then transmitted once all previously stored jobs have been
completed.
If more than one document has been scanned into memory for transmission,
the documents (jobs) will be transmitted in the order in which they were
scanned. If you have an urgent transmission and do not want to wait until
previously stored jobs are completed, you can press
your document. Your document will be transmitted immediately after the
current job is finished.
If you don't want the document to be transmitted from memory, you can press
DOCUMENT
after loading the document. Your machine will call the receving fax
M/?
machine immediately after the current job is finished (ahead of any previously
stored jobs in memory), and the document will be scanned as soon as the
connection is established.
♦
The FO-DC500/525 can hold approximately 500 pages of average content
in memory. The FO-DC600 can hold approximately 1,000 pages. Less
pages can be held if any were scanned using fine, super fine, ultra fine, or
halftone resolution.
♦
The amount of memory currently occupied appears as a percentage
("M:00%") in the display.
Sending a Fax by Automatic Dialing
PRIORITY
after loading
45