Sharp FOD-C525 Networking Manual page 182

Entering and Using Programs
13
Go to the specific procedure for your operation (see the following
pages).
Transmission (SEND MODE)
(Continued from Initial procedure .)
14
Dial the receiving machine using one of the following methods:
•
Press a Rapid Key.
• SPEED DIAL
Press
digits, press
•
Enter a full fax number with the numeric keys.
•
Press
network scanner option is installed.)
15
START/
Press
ENTER
16 RESOLUTION
Press
desired, and then press
17
If you want the document to be sent through memory, press
If you want the document to be sent directly from the feeder, press
DOCUMENT
. (This is not possible if you included a timer setting or are
M/?
sending the document to an e-mail, FTP, or Desktop destination.)
STOP
18
Press
180
and enter a Speed Dial number (if you enter less than 3
START/
to complete the entry).
ENTER
e-mail
, enter an e-mail address, and then press
.
CONTRAST
and/or
START/
ENTER
repeatedly until you return to the date and time display.
to adjust the resolution and contrast if
.
START/
. (Only if the
ENTER
START/
.
ENTER