Sharp FOD-C525 Networking Manual page 226

Problems and Solutions
The machine is on and
data is received, but the
data is not printed. (The
DATA indicator blinks.)
The machine cannot be
selected from your
computer.
Incorrect printing
orientation
The printed image is
clipped or off the edge of
the paper.
Printing stops in the
middle of a print job.
The paper specified in the
software application is not
used.
224
• Check to see if an error message appears in the
display of the machine.
• Is the specified size of paper loaded in the
machine? Load paper or select another paper size.
• Is the printer driver installed correctly? Install the
printer driver correctly.
• Is the orientation setting in the printer driver
correct? Correct the orientation setting in the Paper
tab of the printer driver.
• Was a different paper size used? Select the same
paper size as the document in the Paper tab of the
printer driver, and make sure that correct size of
paper is loaded in the selected source.
• Make sure the orientation setting in the Paper tab
of the printer driver is the same as the orientation of
the original document.
• Check the display of the machine to see if a
message appears. Correct the problem indicated
by the message.
• Make sure that the desired paper is set in the paper
tray or cassette of the machine and select "Auto"
for the paper source in the printer driver.