Sharp FOD-C525 Networking Manual page 116

Using an LDAP Server: Searching for Destinations and User Authorization
9
Complete the operation as follows:
•
E-mail: Transmission will begin after 5 seconds. If you wish to enter a
message or change the sender name, sender e-mail address or file format,
press
then perform steps 10 through 12. If you do not press
the operation.
•
Fax: Transmission will begin immediately. This completes the operation.
•
Broadcast transmission: You will return to Step 3 of the Broadcast
procedure on page 151. Select another destination in Step 3 or go on to
Step 4 of the Broadcast procedure.
10
If you pressed
change e-mail options or enter a
message, the screen at right will
appear. Press
that you wish to change and then press
START/
. Change the selected option as
ENTER
follows:
•
FROM
Enter your name, press
•
FILE FORMAT
Press
and compression (G3, G4 or NO COMPRESSION), and then press
•
MESSAGE
Use the letter entry keys to enter a message (maximum of 256 characters).
A line break can be entered by pressing
114
before 5 seconds elapes (before transmission begins), and
in Step 9 to
to select the option
START/
, enter your e-mail address, and press
ENTER
to select the desired combination of file format (TIFF or PDF)
, this completes
1:START SCANNING
2:FROM
XXX
3:FILE FORMAT
XXX
4:MESSAGE
NO MESSAGE
. When finished, press
START/
.
ENTER
START/
.
ENTER
START/
.
ENTER