Entering Your Name And Fax Number - Sharp FOD-C525 Networking Manual

Entering Your Name and Fax Number

Before you can begin using the machine, you must program your name and
fax number. Once you program this information, it will appear automatically at
the top of each fax page you send.
Important!
FCC regulations require that your name, telephone/fax number, and the date
and time appear on each fax message you send. Enter your name and fax
number here and set the date and time as explained in the following section to
have the machine include this information automatically at the top of your fax
messages.
Note: If you have installed the dual-line option, use the procedure on page 67
to enter your name and the number of each line.
1
MENU
Press
until ENTRY MODE is selected in the
display.
2
START/
Press
ENTER
until OWN PASSCODE SET is selected.
3
START/
Press
ENTER
4
Enter your fax number (max. of 20 digits) by pressing the numeric keys.
•
To insert a space between digits, press
•
To clear a mistake, press
and then or
and then or
.
STOP
Entering Your Name and Fax Number
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
ENTRY MODE
01:DESTINATION SETTING
02:PASSCODE SETTING
03:OWN PASSCODE SET
OWN PASSCODE SET
SENDER'S NUMBER
.
.
25