Sharp FOD-C525 Networking Manual page 53

Checking the status of the current job
The display normally shows the date and time and prompts related to operations
you are performing. To check and see what number the machine is currently
calling or transmitting to, or what number the machine is currently receiving a
document from (if this information is available), press
current fax job (FAX STATUS) will appear in the display. If the dual line option is
installed, the fax status will appear separately for each line. To switch back to the
date and time display, press
network printer option is installed, the NETWORK PRINT STATUS screen
showing current printer activity will also appear.)
To cancel a fax transmission or reception
To cancel a fax transmission or reception that is currently in progress, press
JOB STATUS
so that the status of the transmission or reception appears in the
FAX-STATUS display, and then press
Checking and canceling stored transmission jobs
To display information on fax jobs that are waiting in memory for transmission,
follow the steps below. You can also use this procedure to cancel a fax job.
1
MEM.STATUS
Press
B
overlay) and then
MEMORY TX STATUS is selected in the
display.
2
START/
Press
ENTER
•
The fax jobs appear.
•
To print out the list of the jobs,
REPORT
press
N/*
JOB STATUS
(flip up the Rapid Key
or
.
.
Name or number
of destination
Sending a Fax by Automatic Dialing
JOB STATUS
one or more times as needed. (If the
STOP
.
Display:
MEMORY STATUS REPORT
1:COPY STATUS
until
2:MEMORY TX STATUS
3:MEMORY RX STATUS
4:MESSAGE CLEAR
Number of stored
transmission jobs
TX STATUS (004)
001:M#132
XXXXX Co.: RECALL (01)
002:M#135
YYYYYY Co.: WAITING
. Information on the
3-digit memory
number assiged to job
10:34 AM
10:38 AM
Status of job
51