Sharp FOD-C525 Networking Manual page 62

Creating and Using Personal Books
Clearing a book
Note: Before you can clear a personal book, you must clear all Rapid Keys,
Speed Dial numbers, Group Keys, and Program Keys that are in the book. If a
transmission or timer operation is pending that uses a number in a book, the
book cannot be cleared until the operation is completed or canceled.
1
MENU
Press
until ENTRY MODE is selected in the
display.
2
START/
Press
ENTER
until BOOK ENTRY MODE is selected
in the display.
3
START/
Press
ENTER
select CLEAR.
4
START/
Press
ENTER
5
Enter the 2-digit number of the book you wish to clear.
6
If the book has a passcode, enter the passcode.
7
START/
Press
ENTER
STOP
8
Press
60
and then
and then or
and then or
.
.
repeatedly to return to the date and time display.
Display:
or
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
ENTRY MODE
06:ID # MODE
07:SYSTEM # MODE
08:STORE JUNK FAX #
09:DEPT. PASSCODE
10:BOOK ENTRY MODE
PERSONAL BOOK SETTING
3:ENTRY MODE
to
1=SET
ENTER #(01-10,
2=CLEAR
, )