Sharp FOD-C525 Networking Manual page 21

3
If you are replacing the drum cartridge,
remove the old cartridge and dispose
of it according to local regulations.
4
Remove the new drum cartridge from
its packaging. Insert the drum
cartridge into the print compartment.
•
Caution! Excessive exposure to light
will damage the drum cartridge. Install
the cartridge promptly after removing it
from its packaging.
•
Make sure the drum cartridge is
inserted in as far as it will go.
5
If you are installing a new toner
cartridge, remove the new toner
cartridge from its packaging. Remove
the tape from the cartridge and then
open the cartridge handle so that it
stands straight up.
6
Shake as indicated by the arrows to
distribute the toner evenly within the
cartridge.
•
If the toner is still lumpy after shaking,
the gears in the cartridge may make a
noticeable sound when the print
compartment cover is closed after
installing the cartridge. This is normal
and does not indicate a problem.
Installing the Print Cartridges
BLUE
GREEN
19