2.12
Connecting the data lines
2.12.1
10/100 Mbit/s twisted pair connection
In the BAT-F, the 10/100 Mbit/s twisted pair connections are M12 sockets.
10/100 Mbit/s ports enable the connection of terminal devices or independent
network segments according to the IEEE 802.3 100BASE-TX / 10BASE-T
standard.
These ports support:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
State on delivery: autonegotiation activated.
The TP connector is a 4-pin M12 female connector with D coding.
On delivery, the connectors are sealed with cover caps.
The housing of the M12 socket is electrically connected to the functional
ground (FE) (
are electrically separated from the functional ground and the metal housing.
Figure
Pin
1
2
3
4
Housing: shield
Table 6:
Pin assignment of a TP/TX interface (M12 socket)
Use a shielded CAT5 cable.
Use a shielded 4-pin M12 plug.
Connect the cable shield to the connector housing.
46
) and to the metal housing of the device. The connector pins
Function
TD+
Transmit Data +
RD+ Receive Data +
TD-
Transmit Data -
RD-
Receive Data -
PoE voltage input
V-
V+
V-
V+
Installation BAT
Release 05 03/2013