Bat54-F Client - Hirschmann BAT series User Manual

1.2.3

BAT54-F Client

The device is equipped with the following connectors and operation
elements:
IP67 WLAN Access Point
1 TX
2 3 2 RX
3 N.C.
4 GND
1 4
Pin Function
V.24 Reset
1 2
BAT54-F Client
Interfaces and display and control elements
1 V.24 Serial interface, 4-pin M12 socket with A coding, data rate min. 19.2 kbit/s, max.
115 kbit/s, connector for serial configuration cable
2 Reset Reset button behind a removable IP67 cap
restarts the device or resets the configuration
3 Ethernet Ethernet port:
4-pin M12 socket with D coding, 10/100BASE-TX, Autosensing, Power over
Ethernet (PoE), automatic MDI/MDIX recognition (no crossover cable required)
4 Power Power supply connector for safety extra-low voltage (SELV/PELV), 5-pin M12
plug
5 LED 4 display elements (power, LS/DA, WLAN, NC)
6 AUX Auxiliary connector for the WLAN module for connecting external antennas
7 Main Main connector for the WLAN module for connecting external antennas
22
7
Main
BAT54-F Client
Uin : 24 VDC
Uin : 48 VDC
1 +24V DC
2 0 V
1 TD+
2 3 3 0 V
2 RD+ 2 1
4 +24V DC
3 TD-
5 N.C.
4 RD- 3 4
1 4
5 Pin Function
Pin Function
Ethernet Power
3 4
6
AUX
CLASS 2 Iin : 420 mA
CLASS 2 Iin : 170 mA (PoE)
P LS/DA
WLAN NC
LED
5 5
Power
LS/DA
WLAN NC
Installation BAT
Release 05 03/2013