Bat300-F - Hirschmann BAT series User Manual

1.2.4

BAT300-F

The device is equipped with the following connectors and operation
elements:
8
Antenna 1
IP67 WLAN Access Point
1 TX
2 RX
2 3
3 N.C.
4 GND
1 4
Function
Pin
V.24 Reset
1 2
BAT300-F
Interfaces and display and control elements
1 V.24 Serial interface, 4-pin M12 socket with A coding, data rate min. 19.2 kbit/s, max.
115 kbit/s, connector for serial configuration cable
2 Reset Reset button behind a removable IP67 cap
restarts the device or resets the configuration
3 Ethernet Ethernet port:
4-pin M12 socket with D coding, 10/100BASE-TX, Autosensing, Power over
Ethernet (PoE), automatic MDI/MDIX recognition (no crossover cable required)
4 Power Power supply connector for safety extra-low voltage (SELV/PELV), 5-pin M12
plug
5 LED 4 display elements (power, LS/DA, WLAN, NC)
6 Antenna 3 Main connector for the WLAN module for connecting the third external
antenna
7 Antenna 2 Main connector for the WLAN module for connecting the second external
antenna
8 Antenna 1 Main connector for the WLAN module for connecting the first external
antenna
Installation BAT
Release 05 03/2013
7
Antenna 2
BAT300-F
Uin : 24 VDC
Uin : 48 VDC
1 +24V DC
2 0 V
1 TD+
2 3 2 1 3 0 V
2 RD+
4 +24V DC
3 TD-
5 N.C.
4 RD- 3 4
1 4
5 Pin Function
Pin Function
Ethernet Power
3 4
6
Antenna 3
CLASS 2 Iin : 420 mA
CLASS 2 Iin : 170 mA (PoE)
P LS/DA
NC WLAN
LED
5 5
Power
LS/DA
NC WLAN
23