Bat-Rail; Mounting/Connecting External Antennas; Connections For External Antennas On Bat-F - Hirschmann BAT series User Manual

2.7.2

BAT-Rail

B A
T 3
0 0
- R
a i l
Figure 7: BAT-Rail, wall mounting
 Fasten on the wall mounting plate (width 120 mm / 4.73 in)
page 67 "Accessories")
 Mount the device on the wall plate as shown in the illustration. Attach the
upper snap-in guide of the device into the rail and press it down against
the rail until it snaps into place.
2.8

Mounting/connecting external antennas

2.8.1

Connections for external antennas on BAT-F

The BAT-F devices have two to four connections for connecting external
antennas. These connections are N sockets.
The housing of the N socket and the signal connection are electrically
connected to the switching ground, the functional ground (FE) ( ) and the
metal housing of the device.
On delivery, the connectors are sealed with cover caps.
 Unscrew the cover caps from the connectors to which you want to
connect external antennas.
Note: Insert the terminators supplied into unused sockets in order to avoid
radio signals from one WLAN module being received by the other WLAN
module.
36
on a level wall surface using four screws.
(see on
Installation BAT
Release 05 03/2013